ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 44 / 182

44
Setup
Press ENTER to confirm the input.
Standard value for baud rate: 19200 baud
Set the transmission speed at the Master station of the concentrate feeders by means of the
DIP switches.
The value entered into the Stand Alone feeder must correspond with the setting of the DIP
switches at the concentrate feeder.
2 1 4 3
1
ON
Switch
ON
OFF
OFF 1200
19200
2400
9600
OFF
ON
OFF
ON
2
Baud
Switch 1
Switch 2
ON
OFF
OFF
ON
OFF
ON
OFF
ON
Master--Control (section)
8.3.3 Selecting the Printing Function
Press Arrow Up or Arrow Down to select menu „Printing“.
Press Arrow Right to move to the next screen.
Select „yes“, in case the verification list should be printed
automatically at midnight. Press ENTER to confirm the input.
Press Arrow Right to go to the next screen.
Press Arrow Up or Arrow Down to select the printer channel
for the serial multiplexer (0--8).
Enter „yes“ and press ENTER to confirm the input.
An input is required only in case one or more Stand Alone feeders that are equipped with
the PC--program „Kalb--Manager“ are connected to a printer via a serial multiplexer. In this
5# baud rate
19200 baud ^
yes
5# setup
printing ^
5# print list
auto print
no
➔
5# print list
auto print
yes
➔
5# switch
pr.channel
0^ no
➔
5# switch
pr.channel
1^ yes
➔
5# switch
pr.channel
1^ yes
➔