54
Setting the Heating
8.6 Setting the Heating
It is imperative to fill the heat exchanger with water
before
switching the heating on!
Thermostat for minimum operating temperature and heating:
The thermostat for minimum operating temperature prevents too cold milk or water from
being dispensed. If the temperature in the boiler falls below the set minimum water tempe-
rature in the heat exchanger, the preparation of the milk will be interrupted until the mini-
mum temperature is reached.
If the minimum operating temperature is not attained, the dis-
play shows the following message:
Factory settings:
The minimum operating temperature is factory--set between 38
°
C and 39
°
C. The minimum
operating temperature should always be set 3
°
C below the heating temperature, in order to
avoid overlaps in the control range.
The heating temperature is factory--set between 42
°
C and 43
°
C.
8.6.1 Adjusting the Thermostats
:
Turn the thermostat for minimum operating temperature (green) so far clockwise, until
both green marks coincide.
+
:
Turn the thermostat for boiler heating (red) so far clockwise, until both red marks
coincide.
+
The marks facilitate temperature setting.
Nevertheless, you have to check the settings regularly.
check temperature
Summary of Contents for TAK5-SA2-KFA-27-F1
