ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 98 / 182

98
Milk Functions
Press ENTER to confirm the input. After the automatic feeder has commuted to the milk
powder mode resp. the milk/water--mix--mode, the missing milk will be replaced by water
and MP.
The concentration of a feeding portion is always taken from the concentration plan. If the
entered concentration value is below or above the milk value, either water or MP will be
added to the milk. In the milk/water--mix--mode, MP is automatically added to the water
until the concentration set in the concentration plan is reached.
Standard value for the milk value: 120 g MP/litre
11.4 Activating Milk Expelling
If the automatic feeder operates in the milk mode, a warm
milk portion in the heat exchanger is always ready for de-
mand. This milk portion can be replaced by a water portion
after a set time. The heat exchanger is then filled with water
and not with milk anymore.
Press ENTER. Enter a pause. Potential input: 1 to 9 hours.
Press ENTER to confirm the input.
The pause is defined as the time after dispense of the last milk portion. After this time has
lapsed the milk portion in the heat exchanger is replaced by a water portion. The portion in
the mixer jar is released for the animal that is identified next. If the animal does not drink up
the available milk, the remaining portion will be pumped off automatically via the mixer
outlet valve after a set time.
See chapter 15.5.4, page 143, „Cleaning, Cleaning Settings, Remaining Portion“.
If the water portion is taken from the heat exchanger, the water will be evacuated via the
mixer draining valve. Only then, a milk portion will be dispensed.
If the automatic feeder operates in the water mode or the heat exchanger is filled with a wa-
ter portion, milk expelling will not take place.
Standard value for milk--expelling: after 1.5 hours
3# Milk expelling
after 1.5 h pause