ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 56 / 182

56
Setting the Heating
8.7 Heating for Milk Powder Outlet and Protection against Frost
Before opening the power unit you have to make the automatic feeder currentless, in order
to avoid electric shocks. To this end, turn the main switch to position „0“/„OFF“ or pull the
mains plug.
Inside the power unit is located a distribution board with integrated switches. See chapter
1.7.2.2, page 16, „Distribution Board“. The left switch is used to switch on and off the hea-
ting for the milk powder outlet. The right switch is used to switch the heating cable on and
off.
In summer it is imperative to set both switches to „0“ ( = OFF )!
The heating for the milk powder outlet prevents creation of condensate on the milk powder
outlet.
The heating cable with temperature control is available as an accessory and can be retrofit-
ted at any time. It is active as soon as temperature falls below 3
°
C and protects hose pipes,
solenoid valves and pressure reducer against frost. We recommend to mount a heating cable
in case the automatic feeder should be installed in an unprotected location exposed to ex-
treme cold.