79
Altering the Operational Data
Press ENTER to confirm the input.
Enter the start and end value of period 1 in litres and press
ENTER to confirm the input. Enter and confirm separately
the figures preceding the decimal point. The cursor starts flas-
hing at the relevant spots.
Press Arrow Right to move to period 2.
Enter the duration of the period in days and the end value in
litres. Press ENTER to confirm the input. You do not need to
enter the start value of the period. This figure has been taken
over from the end value of the preceding period.
Press Arrow Right to move to the periods 3 to 5. Proceed as
with the periods 1 and 2.
After the 5th period, the display shows the total duration of
the feeding plan:
The next screen shows plan requirement for the amount of
milk and solid matter calculated from the feeding-- and the
concentration plan. Example with standard values:
Standard values feeding plan:
(also refer to the annex of this instruction manual)
group A: total 478 L = 77 days
group B: total 384 L = 70 days
group C: total 316 L = 64 days
group D: total 346 L = 71 days
10# A per.1 4 days
fr. 5.0L to 6.0L
➔
10# A per.2 14 days
fr. 6.0L to 8.0L
➔
10# A per.2 15 days
fr. 6.0L to 9.0L
➔
10# A per.3 18 days
fr. 9.0L to 9.0L
➔
10# feeding plan
plan lasts
77 days
10# target consum.
478 L SM: 56 kg
Summary of Contents for TAK5-SA2-KFA-27-F1
