97
Milk Functions
11 Milk Functions
In menu „Milk functions“ you can carry out all settings relating to fresh milk feeding.
11.1 Selecting the Milk Mode
Turn the program switch to 10 = keyboard.
Enter 3 and press ENTER to confirm the input.
Press Arrow Right to go to the next screen.
Select „yes“ or „no“ and press ENTER. The automatic feeder
operates in the milk mode.
„Milk Mode, no“ means that the automatic feeder runs in the water mode, i.e. no milk is fed.
It is advisable to carry out this setting, if no milk is fed over a long period of time.
11.2 Commuting to Milk Powder Mode
If the milk tank is empty, the automatic feeder will switch off
or commute to milk powder mode.
„Change to MP, yes“ means that the automatic feeder continues to operate in the milk pow-
der mode as soon as the fresh milk tank is empty.
„Change to MP, no“ means that the automatic feeder switches off as soon as the fresh milk
tank is empty.
Select „yes“ or „no“ and press ENTER to confirm the input.
Take care that the powder hopper is always filled with milk powder!
11.3 Entering the Milk Value
The milk value is defined as the content of solid matter (SM--
content) of the milk. The SM--content of whole milk corres-
ponds to approx. 120 -- 130 g/L.
Press ENTER and enter the SM--content of the milk.
3# milk functions^
➔
3# milk mode
yes
➔
3# if milk empty
change to MP
yes
3# milk value
120 g/L SM
Summary of Contents for TAK5-SA2-KFA-27-F1
