ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 35 / 182

35
Input Routine
6.2 Input Routine
:
Keep the function table at your fingertips.
Function table
At the left of the function table „Switch Menu“ are listed the names of the main menus cor-
responding to the relevant position of the program switch. At the right of them are indicated
the submenus and the corresponding messages displayed on the screen.
At the left of the function table „Keyboard Menu“ are listed the numbers you have to enter
in order to move to the keyboard menus. The abbreviations used in the program are listed in
alphabetical order at the lower part of the function table.
Turn the program switch to select the desired switch menu.
Press Arrow Up or Arrow Down to select the desired submenu.
The switch or keyboard menu contains the submenus written in columns and in vertical or-
der. Arrow Up ^ on the display indicates that the switch menu consists of several submenus.
Press Arrow Right to select one after another all messages of the selected menu.
Arrow Right on the display shows that further screens are going to follow.
Press Arrow Up or Arrow Down to select the animal number or the group.
When the keys are active, the display shows the character ^.
You have to open the memory before making inputs (the cursor flashes). For this, press
ENTER.
The memory for the input of numbers into the keyboard menu is already open. The cursor
flashes. Enter the corresponding figure and confirm with ENTER. If a menu has several in-
put possibilities, only open the first input area, the remaining areas will open automatically
when you close the preceding one. Press ENTER to confirm all inputs.
If the memory is closed (the cursor does not flash), press ESCAPE to return to the begin-
ning.
Press ESCAPE once again to return to the first screen of the menu.