46
Setup
Put a weight on the scales (in case of 50 kg e. g. two sacks of
milk powder). Press Start/Stop once again. The display
shows:
The tare value is automatically set for the connected half--
body scales. For example:
Press ENTER to confirm the indicated tare value.
In case the tare value should be checked once again, repeat the setting--routine for tare va-
lue. The ascertained tare value must correspond to the one determined before.
8.3.5 Carrying Out an Interface Test
If there is no communication between the concentrate stations, the printer, the PC or the an-
imal scales, it is advisable to carry out an interface test. This test has to be carried out by
Customer Service.
:
Put the test connector on the motherboard.
See connecting diagram
.
Press Arrow Up or Arrow Down to select menu „Interface
test“.
Press Arrow Right to go to the next screen.
Use Arrow Up or Arrow Down to select channel 1--5.
Enter „yes“ and press ENTER to confirm the input.
8.3.6 Registering and Cancelling the Feeding Stations
In this menu you can register and cancel feeding stations and enter the draining time (time
between release of the electrode at the final portion and closing of the corresponding box
valve) for each station.
Press Arrow Up or Arrow Down to select menu „Boxes“.
Press Arrow Right to go to the next screen.
Select feeding station 1 or 2.
Enter „no“ to cancel the feeding station and press ENTER to
confim the input.
5#
50 kg put on
scales.............
HW1 tare value
440 set? start
5# setup
interface test^
➔
interface
test
1^ chann. no
interface
test
1^ chann. no
interface
test
1^ chann. yes
5# setup
boxes^
➔
5# box no.
1^
available
? yes
5# box no.
1^
available
? yes
5# box no.
1^
available
? no
Summary of Contents for TAK5-SA2-KFA-27-F1
