ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 174 / 182

G Annex
If the supply electrode is not earthed, the automatic feeder
will check whether the electrodes and the solenoid valves are
tight. The display shows:
The cleaning valve as well as the solenoid valve close auto-
matically while the milk pump is running. The cleaning pro-
cess cuts off as soon as a fault message is displayed. See
chapter „Alarms“.
After the main cleaning process has been completed, remove
the suction hoses from the milk supply of the automatic fee-
der. Only then rinsing starts running.
After you have removed the hoses, press ENTER to confirm
„yes“.
The following message is displayed:
Rinsing
In support of rinsing, push the button located at the upper left of the chassis to activate the
feeding pump. The cleaning water is pumped out via the mixer jar and the suction hoses
connected to it. The next water portion will be delivered via the coil as soon as the long
electrode (level electrode) is free.
After the residual detergent has been rinsed, press Start/Stop
to complete the rinsing process. The display shows:
Rinsing ends as soon as the mixer jar is empty. The display jumps back to the initial menu
„HE with hoses, Clean ? Start“.
Turn the program switch back to „Feeding Mode“.
Turn the program switch back to position „Feeding Mode“ only in case no detergent has
been utilized or after you verified that there the system does not contain any water with de-
tergent anymore.
solenoid valves
are being checked
hoses
uncoupled
yes
press feeding pump
afterrinse
stop
emptying mixer