ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 144 / 182

144
Cleaning
Enter after which time the remaining portion should be
drained off. Press ENTER to confirm the input. Potential in-
put: up to 99 minutes.
Potential input: 0 to 99 minutes. Standard value: 30 minutes.
15.5.5 Cleaning Settings Detergent
This menu is only displayed if the automatic feeder is equipped with a detergent dosing
pump that has been previously selected in Setup.
Turn the program switch to 2 = rinsing.
Press Arrow Up or Arrow Down to select submenu
„Settings“.
Press Arrow Right to move to the next screen.
Press Arrow Up or Arrow Down to select submenu
„Detergent“.
Press Arrow Right to move to the next screen.
Enter the detergent amount and press ENTER to confirm the
input. For dosage refer to the package insert.
15.5.6 Cleaning Settings Compressed Air--Cleaning
Turn the program switch to position 2 = cleaning. The display
shows:
In the Powder--version „Mixer“ is displayed instead.
Press Arrow Up or Arrow Down to select submenu
„Settings“.
Press Arrow Right to move to the next screen.
Press Arrow Up or Arrow Down to move to submenu „Air
Cleaning“.
remain.portionafter
25 min empty
cleaning
HE with sponge^
➔
cleaning
settings^
➔
cleaning settings
heat exchanger^
➔
cleaning settings
detergent^
➔
detergent
0 g/L
➔
detergent
15 g/L
➔
cleaning
HE with sponge^ ➔
cleaning
settings^ ➔
cleaning settings
heat exchanger^
➔
cleaning settings
air cleaning^
➔