ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 64 / 182

64
Entering the Correction Days
8.10 Entering the Correction Days
The correction days are intended to shift each animal to any point of the relevant curve of
e.g. the feeding plan and the concentration plan. Refer to chapter 10 ff, page 78 ff, „Altering
the Operational Data“).
:
Positive numbers (with +): Enter positive numbers in order to „make the animals older“
and to shift them to the right of the curve.
:
Negative numbers (with --): Enter negative numbers in order to „make the animals youn-
ger“ and to shift them to the left of the curve.
Turn the program switch to 6 = animal data and Info.
Press Arrow Right to move to the following screen:
Select the animal number.
Press ENTER to confirm the input.
Enter the number of correction days and press ENTER to con-
firm the input.
At registration the animals start on the first day of the curve. Therefore at housing you can-
not enter negative numbers, because no animal can be fed prior to the beginning of the
curve. The animals cannot be made younger immediately after housing.
If during concentrate feeding automatic weaning is active and the animal has exceeded the
initial value, the display will show in the first line e.g. „weang.+ 5 days“ (weang. = weaning
days) instead of e.g. „corr. + 0 days“. In this case the animal will be shifted to the right of
the feeding plan by 5 days.
animal data & Info
weight, days fed^
➔
2A^corr. + 0 days
expires in 77days