155
Animal Scales
19 Animal Scales
For connection, see Connection Plan.
Make sure that animal scales 1 is connected to feeding station 1 and animal scales 2 to fee-
ding station 2. On the motherboard, scales 1 corresponds to channel 4 and scales 2 to chan-
nel 5.
In keyboard menu „Animal Scales“ (program switch position 10), enter 25 to carry out the
following:
-- Test the connected animal scales. The display shows the animal weight that has just been
ascertained.
-- Tare the animal scales and carry out weighing.
-- Check whether communication has been established to the connected animal scales.
19.1 Testing Connection, Taring Animal Scales,Carrying Out Weighing
Turn the program switch to 10 = keyboard.
Enter 25. Press ENTER to confirm the input. The automatic
feeder briefly tests automatically whether communication to
the animal scales has been established or not.
The display shows:
Press Arrow Up or Arrow Down to select the box to which
communication has to be tested.
Press Start/Stop to start the connection test.
If there is no connection to the animal scales, the display will
show the following error message:
If the connection is o.k., the display will show the following
message:
After 11 connection errors to the animal scales, an alarm will be triggered and the animal
scales will be deactivated.
Press Arrow Right to move to the next screen.
Press Start/Stop to tare the scales.
➔
25# test
box:2
please wait......
➔
25# test
box: 2^
connection
start
anim.scales 1&2
connection error!
anim.scales 1&2
connection
ok!
➔
25#HS1 at
box:2
tare
start
25#HS1 at
box:1
tare...............
Summary of Contents for TAK5-SA2-KFA-27-F1
