ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 40 / 182

40
Basic Inputs during Installation
8 Basic Inputs during Installation
8.1 Checking Date and Time
When installing the automatic feeder first of all you have to check and, if necessary, change
date and time in the keyboard menu „Machine Data“. Time goes on, even after the machine
has been switched off.
Turn program switch to 10 = keyboard.
Enter 1. Press ENTER to confirm the input.
If necessary, press Enter to set date and time.
Press ENTER again to confirm the input.
After you have changed the date, turn the program switch to position „Feeding Mode“ in
order to activate daily calculation (see chapter 9.6, page 77, „Daily Calculation“) .
8.2 New Installation
When installing the automatic feeder you have to carry out the function „All new“ in keybo-
ard menu „New installation“ in order to be sure that the memory does not contain any
wrong data. The animal data are deleted and the operational data are overwritten by standard
values.
Animal data are e.g. group allocation, housing date, feeding days, total consumption etc.
Operational data are all non animal--specific data, like e.g. feeding plan, concentration plan.
The standard values for operational data are empirical. You can change them at any time and
bring them into line with individual requirements. See chapter 10, page 78, „Altering the
Work Data“ .
If you select „All New“ all exercises concerning input routine will be deleted.
Turn the program switch to 10 = keyboard.
Enter 99. Press ENTER to confirm the input.
Select „yes“ and press ENTER. All animal data are deleted
and the operational data are overwritten by standard values.
1# date 17.07.03
time:
08:01:09
99#
new installation
all new ? no
➔
99#newinstallation
all new ? yes
➔