ROBBE TAK5-SA2-KFA-27-F1, Instruction Manual

Page: 59 / 182

59
Animal Identification
case of micro--identification „Mikro--Tiris“, install a screening of the antennas by means of
earthed metal sheet plates. If necessary, close off the area beside the feeding station.
Move to the next screen. Set the input or reading sensitivity
of the antennas. The higher the entered value, the lower the
antenna range. Potential input: 0 to 200.
Press ENTER to confirm the input.
The following table contains Squelch values and identification ranges for the different Re-
sponders. These Squelch values are empirical and already factory--set.
Responder Squelch (Standard values) Identification range
X--Responder 0 max. 25 -- 30 cm
Ear tag--Responder 0 max. 25 -- 30 cm
The entered value is active, until you change it manually.
8.8.4 Manual Input of Responder Numbers
Press ENTER. Subsequently, enter the desired animal number
and the corresponding Responder number.
Press ENTER to confirm the input.
Press Arrow Up or Arrow Down to select the next animal
number.
Press ENTER to confirm the input.
After the Responder input has been completed, press
ESCAPE to return to the menu.
➔
squelch antenna
feeding 180
animal No.: 1a^
transm.-No.: 1234
animal-No.: 2a^
transm.-No.: 1235