13
Construction Parts Concentrate Feeder
Master--control
(Control unit at the
rear of the Master--
Concentrate feeder)
Coding switch to set the baud rate
Slide switch for adlib or
restricted mode
RESET key
Program chip
Interface card RS 422
(for connection to Stand
Alone)
Calibration button (to
carry out calibration)
LED (green) for
data exchange
between concen-
trate station and
Stand Alone
LEDs (yellow) for
dosing flap
(1=Master, 2=Slave)
LED on = signal
empty
LEDs (green) for
identification
(1=Master,
2=Slave)
LEDs (red) for
alarms on concen-
trate station
(1=Master,
2=Slave)
LED (green) for
power supply
Identification Slave (green)
Reed switch Slave (yellow)
Calibration button
Slave--control
(at the rear of the
Slave--Concentrate
feeder which is con-
trolled by the Master)
Summary of Contents for TAK5-SA2-KFA-27-F1
