PAGE 1 OF 8
0313 IH-3827
H-3827, H-3828
H-3829, H-3830
ADVENTURER PRO
BALANCE SCALES
1-800-295-5510
uline.com
π
UNPACKING
Carefully remove your Adventurer Pro balance and
each of its components from the package. Save the
packaging to ensure safe storage and transport.
ASSEMBLY OF MODELS H-3829 & H-3830
1. Insert the Sub-platform on the Mounting Cone
located in the center of the balance. Align the
Sub-platform so that it is fully seated on the Cone.
(See Figure 1)
2. Place the Weighing Pan on the Sub-platform.
(See Figure 1)
3. For applicable Adventurer Pro models, place the
Wind Ring over the pins located on the perimeter of
the balance.
INSTALLING COMPONENTS
Use the illustrations and instructions below to identify
and assemble your Adventurer Pro model with its com-
ponents. All components must be installed before using
the balance.
ASSEMBLY OF MODEL H-3827
1. Insert the Sub-platform on the Mounting Cone
located in the center of the balance.
2. Place the Weighing Pan on the Sub-platform.
(See Figure 2)
3. Place the Wind ring over the shoulder of the
balance. (See Figure 2)
Sub-platform
Mounting Cone
Weighing Pan
Pin
Wind Ring
(INCAL models)
Figure 1
INSTALLATION
Figure 2
Weighing Pan
Sub-platform
Wind ring
Mounting Cone
Shoulder
