PAGE 7 OF 8
0313 IH-3827
DYNAMIC/ANIMAL WEIGHING
CONTINUED
AUTOMATIC MODE
The balance returns to the Ready condition when the
animal is removed from the pan. If the Function button
is pressed before the animal is removed from the pan,
the primary display shows the actual weight and the
secondary display alternates between ANIMAL and
CLEAR PAN until the animal is removed from the pan.
The balance then returns to the Ready condition.
SEMIAUTOMATIC AND MANUAL MODES
Remove the animal from the pan and press the
Function button to return to the Ready condition. If the
Function button is pressed while the animal is on the
pan, the primary display shows the actual weight and
the secondary display alternates between ANIMAL and
CLEAR PAN. The balance returns to the Ready condition
when the animal is removed from the pan. The Animal
Weigh level and mode settings are made in the Mode
menu.
ADDITIONAL FEATURES
WEIGH BELOW
The Adventurer Pro balance is equipped with a weigh
below hook.
NOTE: Before turning the balance over,
install the cone cover to prevent damage
to the load cell.
To use this feature, remove power from the balance
and remove the protective cover for the weigh below
opening.
The balance can be supported using lab jacks or any
other convenient method. Make sure the balance is
level and secure. Use a string or wire to attach items to
be weighed.
BATTERY OPERATION
Models with the battery operation feature will display
the battery change indicator as shown below.
If batteries are installed and AC power is not present,
the balance operation is affected as follows:
• The LCD backlight is normally off to conserve power.
The backlight turns on when the display becomes
unstable or when a button is pressed. The backlight
turns off 5 seconds after the display becomes stable or
after 5 seconds with no button presses. The backlight is
always off if the Backlight menu setting is OFF.
• Auto Off is set to 5 minutes. If continuous operation is
desired, change the Auto Off menu setting to Off.
• The battery charge level is annunciated by means
of a 3 segment battery symbol on the display as
follows:
CLEANING
If cleaning is required, use a soft cloth dampened with
water and a mild detergent. Do not allow liquids to enter
the balance. Do not use harsh chemicals to clean the
balance as the finish may be damaged.
Full charge
2/3 charge
1/3 charge
Replace batteries
(Flashing)
OPERATION CONTINUED
