Ricoh Type M12, Field Service Manual

Page: 99 / 226

Width and reduction
A4: A4 (8.3"), no reduction
B4: B4 (10.1"), no reduction
A3: A3 (11.7"), no reduction
I/O rate
0: 0 ms/line
5: 5 ms/line
10: 10 ms/line
20: 20 ms/line
25: 2.5 ms/line
40: 40 ms/line
• "40" is displayed while receiving a fax message using AI short protocol.
System Switch 01 - Not used (Do not change the factory settings.)
System Switch 02 (SP No. 1-101-003)
No Function Comments
0-1 Not used Do not change these settings.
2
Forced reset after transmission stalls
0: Off
1: On
With this setting on, the machine resets itself
automatically if a transmission stalls and fails to
complete the job.
3 Not used Do not change these settings.
4
File retention time
0: Depends on User Parameter 24
[18(H)]
1: No limit
1: A file that had a communication error will not be
erased unless the communication is successful.
5-7 - Do not change this setting
System Switch 03 - Not used (Do not change the factory settings.)
System Switch 04 (SP No. 1-101-005)
No Function Comments
Bit Switches - 1
97