Ricoh Type M12, Field Service Manual

Page: 118 / 226

1
Repetition of data when the
received page is longer than the
printer paper
0: Off
1: On
1: Default. 10 mm of the trailing edge of the previous
page are repeated at the top of the next page.
0: The next page continues from where the previous
page stopped without any repeated text.
2
Prints the date and time on
received fax messages
0: Disabled
1: Enabled
This switch is only effective when user parameter 02 - bit
2 (printing the received date and time on received fax
messages) is enabled.
1: The machine prints the received and printed date and
time at the bottom of each received page.
3-7 Not used Do not change the settings.
Printer Switch 01 (SP No. 1-103-002)
No Function Comments
0-2 Not used Do not change the settings.
3-4
Maximum print width used in the
setup protocol
These bits are only effective when bit 7 of printer
switch 01 is "1".
Bit 4 Bit 3 Setting
0 0 Not used
0 1 A3
1 0 B4
1 1 A4
5-6 Not used Do not change the settings.
7
Received message width restriction
in the protocol signal to the sender
0: Disabled
1: Enabled
0: The machine informs the transmitting machine of the
print width depending on the paper size available
from the paper feed stations.
Refer to the table on the next page for how the
machine chooses the paper width used in the setup
protocol (NSF/DIS).
1: The machine informs the transmitting machine of the
fixed paper width which is specified by bits 3 and 4
above.
4. Service Tables
116