Ricoh Type M12, Field Service Manual

Page: 105 / 226

1
Going into the Energy Saver mode
automatically
0: Enabled
1: Disabled
1: The machine will restart from the Energy Saver
mode quickly, because the +5V power supply is
active even in the Energy Saver mode. The LED of the
operation switch is flashing instead of entering
Energy Saver mode.
Use this setting if an external telephone has to be
used when the machine is in the Energy Saver mode.
2-3 Not used Do not change these settings.
4-5
Interval for preventing the machine
from entering Energy Saver mode if
there is a pending transmission file.
If there is a file waiting for transmission, the machine
does not go to Energy Saver mode during the
selected period.
After transmitting the file, if there is no file waiting for
transmission, the machine goes to the Energy Saver
mode.
Bit 5 Bit 4 Setting
0 0 1 min
0 1 30 min
1 0 1 hour
1 1 24 hours
6-7 Not used Do not change
System Switch 16 (SP No. 1-101-023)
No Function Comments
0
Parallel Broadcasting
0: Disabled
1: Enabled
1: The machine sends messages simultaneously using
all available ports during broadcasting.
NOTE: If a customer wants to keep a line available
for fax reception or other reasons, select "0"
(Disable).
1
Priority setting for the G3 line.
0: PSTN-1 > PSTN-2 or 3
1: PSTN-2 or 3 > PSTN-1
This function allows the user to select the default G3
line type. The optional SG3 units are required to use
the PSTN-2 or 3 setting.
2-7 Not used Do not change these settings.
System Switch 17 - Not used (do not change these settings)
Bit Switches - 1
103