6
DNS server registered when
Gatekeeper/SIP server host name specified
on sender’s side?
Contact the network administrator.
• The sender machine displays this error code
when the sender fax is a Ricoh model.
7
Enable H.323/Enable SIP SW is set to on?
Request the sender to check the settings.
User Parameter SW 34 Bit 0/SW 34 Bit 1
• Only if the remote sender fax is a Ricoh fax.
8
Local fax IP address registered?
Register the IP address.
9
Local fax Alias number registered?
Register the Alias number.
10 Network bandwidth too narrow?
Request the system administrator to increase the
bandwidth.
Lower the start modem reception baud rate on
the receiving side.
IPFAX SW06
11 Remote fax cancelled transmission?
Check whether the remote fax cancelled the
transmission.
12
Local fax registered in Gatekeeper/SIP
server?
Contact the network administrator.
• The sender machine displays this error code
when the sender fax is a Ricoh model.
IP-Fax Troubleshooting
81
Summary of Contents for Type M12
