Ricoh Type M12, Field Service Manual

Page: 14 / 226

6. Align the FCU board with the rails [A], and then install the FCU [B] fully into the FCU slot.
7. Attach the FCU slot cover [A] ( x 3).
• One of the three screws is provided with this option.
8. If a G3 option is to be installed; See (G3 Interface Unit).
9. Reinstall the controller box cover ( x 4).
10. Attach the handset support bracket and handset bracket to the machine, and then connect
the handset cord with the ferrite core to the "TEL" jack if you install the handset to the
machine.
• For details, refer to "Handset Installation" in the Service Manual for the Fax Unit (D3A5).
• Only for the Taiwan model, install the telephone jack cap in the “TEL” jack if the handset is not
installed on the machine.
1. Installation
12