Ricoh Type M12, Field Service Manual

Page: 36 / 226

Installing the application in the Remote Machine and Client-side Machine
1. Remove the SD card slot cover from the SD card slots [A] ( x 1).
2. Insert the SD card (Fax Connection Unit Type M12) in SD slot 1 (upper) with its label face
towards the front of the machine if SD slot 1 is vacant. If not, follow the procedure below.
3. Plug in, and then turn on the machine.
4. Press [Firmware Version] in the [Administrator Tools].
• [User Tools/Counter] > [System Settings] > [Administrator Tools]
5. Check whether the aics version is displayed.
Moving a Fax Communication application into an SD card in SD slot 1
1. Insert the SD card (Fax Connection Unit Type M12) SD slot 2 (lower) with its label face
towards the front of the machine. Then push it slowly into SD slot 2 (lower) until you hear
a click.
2. Plug in, and then turn on the machine.
3. Move the Fax Connection Unit Type M12 application from the SD card in SD slot 2 (lower)
to the SD card in SD slot 1 (upper) with SP5-873-001.
1. Installation
34