manualshive.com logo in svg

Rethink Robotics Sawyer, Original Instructions Manual, Page: 76 / 220

Share
Download
Rethink Robotics Sawyer Original Instructions Manual Download Page 76

69

Intera  5.3

End of Arm Tooling

7. Click Save.

Here is the Tooling Gallery panel for end of arm tooling with two tools, "LEFT" and "RIGHT":

The new tools show up as orange blocks on the robot in 3-D view.

There are three cubes visible in this example. The black cube on the end of the arm represents the 
tool plate. The other two green cubes are the "LEFT" and "RIGHT" endpoints, which show you 
where in 3-D space the robot will perform its actions. The "RIGHT" tool has been selected as the 
active tool center point; its axes are displayed.

You can select which endpoint will be active by making a selection from the Tool dropdown menu 
on the upper left of the window or by selecting the tool from the Tooling Gallery. Only one tip can be 
active at a time.

Summary of Contents for Sawyer





























































































































































































































Reviews:

No comments