manualshive.com logo in svg

Rethink Robotics Sawyer, Original Instructions Manual, Page: 131 / 220

Share
Download
Rethink Robotics Sawyer Original Instructions Manual Download Page 131

124

Intera 5.3

TCP/IP

TCP/IP 

For the latest and most detailed information on Sawyer and Intera 5, we always recommend you 
see the Online User Guide at: 

mfg.rethinkrobotics.com/intera.

 The Rethink Robotics support page 

is here:

 

Rethink Support.

 

Transmission Control Protocol/Internet Protocol, better known as TCP/IP, is the suite of 
communications protocols used to connect hosts on the Internet, over Ethernet or wifi. Built into the 
UNIX operating system, it is used in Intera 5 to enable Sawyer to communicate with work cell 
devices such as PLCs, barcode readers, and cameras. 

TCP/IP allows for more flexible communication than is possible with Modbus devices because it 
allows Sawyer to send and receive arbitrary messages.

Definitions

IP address -- A unique identifier for every workstation in the world. The address is a four byte value, 
e.g., 192.168.1.52. 

TCP -- Responsible for verifying the correct delivery of data from client to server. Can detect errors 
or lost data and trigger retransmission until data is correctly and completely received. 

TCP Socket --  A socket is an endpoint of a TCP connection, identified with an IP address and a 
port number. A port number is a semi-arbitrary way to divide up different connections to the same 
IP address. A useful analogy: if an IP address is like a telephone number, the port number is the 
phone's extension. 

Summary of Contents for Sawyer





























































































































































































































Reviews:

No comments