Rethink Robotics Sawyer Original Instructions Manual Download Page 42 | Manualshive

Page: 42 / 220

Rethink Robotics Sawyer Original Instructions Manual Download Page 42

35

Intera 5.3

Getting Started with Intera 5

Note: Be careful changing to another language, because you will need to
understand that new language to change the settings back if you want to revert
to your original language.

•

Help -- Provides a link to the Intera Online User Ghide at:

mfg.rethinkrobotics.com/intera,

including an option to download this PDF. (You

need to be connected to the internet to access the guide.)

•

Export Logs -- Downloads log data from the robot to your computer.

•

Lock Robot -- Toggle between locking and unlocking Sawyer. This feature helps
prevent unauthorized personnel from tampering with the tasks stored on the
robot. If it is locked, users can only run, reset, clear errors/confusion, or power
cycle on the robot. Tasks cannot be created, modified or changed.

RUN BUTTON ICONS

Restart, Run, and Step - Run the task defined by the behavior editor. You can run the entire task
from the beginning, run the task, step through it one node at a time, and stop the task. (The square
stop button appears while the task is running.)

«
...
40
41
42
43
44
...
»

Summary of Contents for Sawyer





























































































































































































































Reviews:

No comments