manualshive.com logo in svg

Rethink Robotics Sawyer, Original Instructions Manual, Page: 73 / 220

Share
Download
Rethink Robotics Sawyer Original Instructions Manual Download Page 73

66

Intera  5.3

End of Arm Tooling

3. Click calibrate: false to highlight it.

Note: 

Do not confuse “calibrate” with “is_calibrated.”

4. Click Set Value and type in True or the number 1 and press Enter. 

You can see some of the numbers quickly change on the shared data panel as the grippers are 
calibrated. The values for is_calibrated and calibrate both change from false to true. 

If there is an object in the gripper, is_gripping will also change to true.

To open and close the gripper, change the set value of cmd_grp. Open the gripper by entering the 
value 0. Close it with the value 1.

You can also calibrate the gripper by clicking on the yellow dot next to the gripper name in the 
Tooling Gallery. The tool is calibrated when the dot turns green.

Summary of Contents for Sawyer





























































































































































































































Reviews:

No comments