manualshive.com logo in svg

Rethink Robotics Sawyer, Original Instructions Manual, Page: 167 / 220

Share
Download
Rethink Robotics Sawyer Original Instructions Manual Download Page 167

160

Intera 5.3

typically fall between 0.8 and 1.5 m/s. That said, the speed for an individual movement can be set in 
the software, and can be tailored to the specific task.

Figure D-3: Chart showing the endpoint velocity for a specific task. This task is designed for maxi-
mizing speed at the endpoint.  J0 and J2 are set to rotate around the base for a 180 degree move-
ment.  The joint acceleration setting is set to 

express

 in the Intera software.

For more information regarding speed as it relates to safety standards, please see 

Sawyer Safety 

Overview: Safety by Design

. 

E-Stop Performance

When an emergency stop is performed, the power is cut to the arm at the motor level, and the robot 
stops wherever it is in the task.  To assess the performance of the E-Stop, two metrics have been 
analyzed, settling time and overshoot.  

Settling Time - The settling time is defined to be the steady state time minus the time at which the 
E-Stop was triggered.

Summary of Contents for Sawyer





























































































































































































































Reviews:

No comments