manualshive.com logo in svg

Rethink Robotics Sawyer, Original Instructions Manual, Page: 33 / 220

Share
Download
Rethink Robotics Sawyer Original Instructions Manual Download Page 33

26

Intera 5.3

Getting Started with Intera 5

Getting Started with Intera 5

For the latest and most detailed information on Sawyer and Intera 5, we always recommend you 
see the Online User Guide at: 

mfg.rethinkrobotics.com/intera.

 The Rethink Robotics support page 

is here:

 

Rethink Support.

 

Before proceeding with this chapter, connect a Sawyer robot to your computer: 

1. Plug one end of a straight-through CAT5 or CAT6 networking cable into the RJ-

45 port outside Sawyer's controller.

2. Plug the other end of the cable into your computer.

Note: 

Alternatively, it is possible to connect to the robot via a network. To do this the 

robot and the PC need to be connected to the in-house factory network. The DHCP 
server on the network will assign the robot an IP address automatically. It would be 
necessary to configure your PC to accept an IP address from the network server if that is 
not the current setting.

Summary of Contents for Sawyer





























































































































































































































Reviews:

No comments