Rethink Robotics Sawyer Original Instructions Manual Download Page 67 | Manualshive

Page: 67 / 220

Rethink Robotics Sawyer Original Instructions Manual Download Page 67

60

Intera 5.3

End of Arm Tooling

nals. Select the pencil icons to verify the signals are configured correctly, but this
is not necessary when using a ClickSmart gripper kit.

11. Any of the signals can be changed except for Power. The Grip, Open, and Closed

signals can be defined based on the setup and task. For example, open and
closed will be different for gripping an object from the outside versus from the
inside. The Open and Closed signals are determined by the position of the sen-
sors on the gripper. An explanation of the default signal settings can be found at
the end of this section.
Note: If a PLG is built according to the User Guide, turn off "invert signal" for the
Grip signal.

12. To test the signals, open the Shared Data and toggle the Grip signal to test if the

Open and Closed signals respond as expected.

«
...
65
66
67
68
69
...
»

Summary of Contents for Sawyer





























































































































































































































Reviews:

No comments