Rethink Robotics Sawyer Original Instructions Manual Download Page 41

Page: 41 / 220

Intera 5.3

Getting Started with Intera 5

TEMPLATE

Note:

A template is a basic or "skeleton" subtree behavior that can be inserted into a task

as needed. Templates do not contain unique properties of the nodes, for example,
references to poses, signals, or other variables.

•

Import Templates -- Open browser on your computer where templates are
stored.

•

Export Templates -- Downloads template files to your computer (file extension
.json).

INTERA

•

About -- Displays robot information, IP address, Intera software version number,
serial numbers and usage counter, both runtime and total power-on.

•

Settings -- Use this dialog box to change the basic settings of Intera, including
which language is used, units of measurement, time, speed, etc.

Summary of Contents for Sawyer





























































































































































































































Search results

Summary of Contents for Sawyer

Reviews:

Rethink Robotics Sawyer, Original Instructions Manual, Page: 41 / 220

Search results

Summary of Contents for Sawyer

Reviews: