manualshive.com logo in svg

Rethink Robotics Sawyer, Original Instructions Manual, Page: 176 / 220

Share
Download
Rethink Robotics Sawyer Original Instructions Manual Download Page 176

169

Intera 5.3

Appendix E: Warnings & Notices

For the latest and most detailed information on Sawyer and Intera 5, we always recommend you 
see the Online User Guide at: 

mfg.rethinkrobotics.com/intera.

 The Rethink Robotics support page 

is here:

 

Rethink Support.

 

Warnings & Notices

If Sawyer is used in a manner not specified by Rethink Robotics, the protection provided by the 
equipment may be impaired.

FCC Part 15 Notice:

This equipment complies with part 15 of the FCC Rules. Operation is subject to the 
following two conditions: 
(1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that may 
cause undesired operation.

IC

This equipment complies with Industry Canada ICES-003 standard.  Operation is 
subject to the following two conditions: 
(1) this device may not cause interference, and 
(2) this device must accept any interference, including interference that may cause 
undesired operation of the device.

CAN ICES-3 (A)/NMB-3(A)

Summary of Contents for Sawyer





























































































































































































































Reviews:

No comments