manualshive.com logo in svg

Rethink Robotics Sawyer, Original Instructions Manual, Page: 160 / 220

Share
Download
Rethink Robotics Sawyer Original Instructions Manual Download Page 160

153

Intera 5.3

End-effectors

Integrators are responsible for selecting end-effectors for use with Sawyer that reduce and/or elimi-
nate hazards.  

Installation

Integrators must install Sawyer following guidelines prescribed by ISO TS 15066 and by Rethink 
installation materials.

Sawyer’s arm must always be securely mounted upright on its pedestal or securely mounted 
upright on a suitably stable surface.

Sawyer must be positioned to ensure separation from other workstations and traffic aisles (to limit 
opportunities for passersby to enter the workspace).

If personnel are working close to Sawyer they must have an unobstructed view of Sawyer at all 
times.

PPE

As is common practice with other industrial equipment personnel interacting with Sawyer are 
required to wear safety glasses (wrap-around type).

General safety

Personnel interacting with Sawyer must not wear loose jewelry nor wear loose clothing and long 
hair must be secured.

Sawyer must not be operated if damaged or operating abnormally.

SOPs & training

Integrators must develop training & procedures and manage the use of Sawyer.

Integrators must provide power off instructions and training to operators.

Integrators must develop SOPs and train personnel on use and interaction with Sawyer.  Training 
must be provided to both personnel working directly with the robot and those within proximity of 
the robot workspace.  It is recommended that access to the cell be limited to trained individuals.

Summary of Contents for Sawyer





























































































































































































































Reviews:

No comments