manualshive.com logo in svg

Rethink Robotics Sawyer, Original Instructions Manual, Page: 46 / 220

Share
Download
Rethink Robotics Sawyer Original Instructions Manual Download Page 46

39

Intera 5.3

Getting Started with Intera 5

Grey - Disabled: a disabled node and its children, if it has any, are ignored by its parent, and thus 
never run.

Green - Running: the node is currently being executed in the running of the task. It is active until it 
either succeeds, fails or encounters an error.

BEHAVIOR EDITOR NAVIGATION

•

Left Click - select a node. Will display in the Node Inspector

•

Right Click - displays modification options. (See Right Click Menu, below.)

•

Double Click a node - opens the Node Inspector

•

Shift + Click a node - selects the node and all its children

•

Click and Drag - move the center of view

•

Zoom in - Scroll up

•

Zoom out - Scroll down

•

Arrow keys - select neighboring node

•

Shift + Arrow keys - move selected node in the specified direction; it will move 
under the node above it

•

Delete - will delete the selected node, or nodes

•

CTRL + Click - enables multi-selection of nodes

•

Clicking a node from the Node Palette adds the node as a child of the selected 
node. If the selected node is a Primitive Node, (i.e. it does not accept children), 
the node will be adding as a sibling.

Summary of Contents for Sawyer





























































































































































































































Reviews:

No comments