Regulus uREG, User Manual

Page: 96 / 107

uREG User Manual
96
16.2. COMMUNICATION SETTINGS
Communication settings are saves in the auxiliary settings bank and are always accessible
via
Monitor3
, even if the device has no APPLICATION )!
Menu in
u REG
has a group of auxiliary settings divided in two sub-groups of transmission
settings: ’ 11 UART communication ’ and ’ 12 Ethernet communication ’.
The setting sub-group UART communication contains 24 settings to program transmission
parameters of serial interfaces, i.e. RS-232, RS-485 and AUX-485. All settings in the sub-group
(once fixed) define default values, i.e. values activated automatically and every time after
starting and restarting the device and after restoring the settings.
The setting sub-group
Ethernet communication contains 21 settings to program network
transmission parameters. All settings in the sub-group (once fixed) define default values, i.e.
values activated automatically and every time after starting and restarting the device and after
restoring the settings.
The settings are listed in Tables 16.2.1. and 16.2.2.
Default settings are in bold; these are activated after first auxiliary power-up and until their first
modification (also, if settings is corrupted).
CAUTION:
While working with
Monitor3
(in the window of Auxiliary settings), all
transmission settings are all presented in one group (division into interface sub -
groups UART and Ethernet have a distinct background color) and numbered 1÷
53.
Settings no. 25 to 32 refer to panel interface (PN-485) and are reserved
(Administrator mode).
CAUTION:
Changing the settings of:

Ethernet port,

protocol for 485/FO interface,

BTS setting to achieve [Port DISABLED]
requires their activation, and uREG must be restarted!