Regulus uREG, User Manual

Page: 42 / 107

uREG User Manual
42
7.17. IO- 0 MODULE (SLOTS 3 to 13…)
The IO-0 module is a universal digital input/output module, e.g. with programmable
bidirectional inputs, equipped with:

2+3 = 5 bipolar digital inputs with programmable
input resistance (220/24 V DC)
→ terminals 11÷13, 15÷16 ;

2+3 = 5 unipolar digital inputs → terminals 18÷20, 22÷23 ;

5 independent make-contact relays → terminals 1, 3, 5, 7, 9 .
CAUTION:
The strips can have pins with screw or spring terminals as well as measurement
pins for probes. For 24-pin I/O modules, it is recommended to use pin stacks!
Fig. 7.17. Terminals of the IO-0 module.
7.18. GP- 0 MODULE (SLOTS 6 to 13…)
GP-0 is a module of the internal double-channel GPRS modem for remote communication
with
u REG
via GSM .

Features of the GP-0 module:
- module form a wide range of uREG modules, installed in the protection slot (also supplied by the slot);
- SIM slot, push-push type (easy access to SIM);
- communications ports: 2 x RS-485, USB;
- SMA type antenna slots;
- signaling LEDs (3 per channel: GPRS for transm 2 programmable);
- configuration via WWW browser or
Monitor3 ;
- full support for prepaid SIM cards (cost analysis, etc.);
- operated via phone (SMS notification), tablet, laptop/PC.

Advantages of the solution:
- cost reduction: no need to use any additional communication equipment
and external power units;
- guaranteed dependability: no need to arrange functional and protocol compatibility
for devices supplied by different manufacturers;

For use in:
- wind farms; - hydroelectric power stations;;
- biogas plants and photovoltaics; - small power supply stations, etc.