Regulus uREG, User Manual

Page: 46 / 107

uREG User Manual
46

NV panel – with alphanumeric LCD,
in vertical arrangement (corresponding to CZIP-1,2,3,4 protective unit panel).
Fig. 8.3. View of the NV front panel.
The operator panel is connected to
uREG
using one of 3 insulated DB9F (female) connectors of
the PN-485 interface (IF-0/IF-1 module), designated as PANEL .
The back wall of each panel has two identical DB9M (male) connectors to enable regular or
180-degree rotated installation.
Each panel can be connected to
uREG
as follows:

integrally – from the front side (panel flush enclosure),
from the back side (panel surface enclosure),
or on the device side (lateral mounting);
or

remotely - wired outside (e.g. to another room),
over a distance up to 15 m.
With this option, one of the DB9M ports on the panel back wall is provided with UNC
thread barrels to be able to tighten the cable plug.
CAUTION:
The operator panel is an accessory, i.e. if there is no panel or it experiences a
malfunction, operation of
uREG
and its protective criteria to be executed will not
be affected!
Do NOT connect more than one panel to one
uREG
device!
Operation with 2 panels is available on special request only!