Regulus uREG, User Manual

Page: 56 / 107

uREG User Manual
56
Readability of the application project can be essentially improved by adding texts (→
comments ). Comments do not have any logic meaning; they can be added in any place in the
sheet and in any order. They usually supplement the information provided by label names of
relations and functors.
List of basic functors divided onto classes.

Functors of logic gates [7]:

OR gate

AND gate

NOR gate

NAND gate

XOR gate

XNOR gate

2AND-OR gate

System-related functors [65], such as:

system reports /obligatory/ • date format on LCD

internal corrections • protocols IEC 60870-5-101,60870-5-104

alarm • spontaneous DNP3

indexation of primary measurements • selection of measurements for LCD
and Monitor3

extended indexation of primary meas. • ATS line selector

extended indexation of secondary meas.

extended indexation of external meas. • keyboard limiter and password

external parameters S1, S2, S3 • measurements of section 1a / 1b [MSK]

time zones • measurements of section 1a / 1b [MSK]

limit currents • measurement of section 1 [MSK]

computer links • measurement of section 2 [MSK]

LCD display • selection of switch 01 ÷ 13

LCD blanking • BKR clock

LCD automatic unit • ATS line selector

event deleting • strobe generator

power unit efficiency • CZIPstd protocol

protocol IEC 60870-5-103 • MODBUS protocol

protocol IEC 60870-5-103 – interference no. • CAN PPM2 protocol

keyboard buttons • SCADA DNP3

data recorder • criteria recorder

functors for selection of ON/OFF operations for the mimic system (different types)

Functors of standalone settings [7]:

1-bit setting

2-bit setting

4-bit setting

8-bit setting • setting redefinition

settings bank change • computer-based change in settings bank