Regulus uREG, User Manual

Page: 65 / 107

uREG User Manual
65
10.2. APPLICATION mode
10.2.1. START AND VERIFICATION
u REG
performs tasks associated with system initialization, including configuration
verification, self-tests and calibration of measurement paths. Although these tasks are
performed quickly, hey are still visible on the LCD.
CAUTION:
uREG
will be ready for operation provided that verification of hardware
configuration (compatibility of modules in slots with the application project ) is
successful and suitable for the currently active APPLICATION or more
advanced in terms of the project .
Then the alphanumeric display will show the last valid text as generated, whereas the graphic
display will show the last valid generated text together with a bay mimic diagram (main screen).
In case of
hardware configuration incompatibility with the application project (insufficient
number of modules and/or improper allocation of slots), the display will show the text:
! Brak zgodności
sprzętu z apl.
For the graphic display, up to 4 missing/misconfigured modules will be additionally listed, e.g.:
Slot 1: brak dostępu do płyty CT-0 /no access to CT-0 board/
Slot 2: brak dostępu do płyty VT-0 /no access to VT-0 board/
and the warning icon displayed:
Fig. 10.2. Indication of hardware incompatibility with the application (graphic panels)
CAUTION:
Once hardware configuration incompatibility is found, the device will lock all
protective functions and handle only communications ports while waiting for
hardware reconfiguration or programming another application (dedicated to
the current module arrangement)!
10.2.2. OPERATION
Specific behavior of the device depends on the state of external digital and analogue
signals and the mode to handle them as defined in APPLICATION .