Regulus uREG, User Manual

Page: 71 / 107

uREG User Manual
71
12. KEYBOARD OPERATIONS
This chapter should familiarize the user with the rules relating to keyboard operations
based on examples with the password required to access settings, how to set astronomical time
and change display settings.
12.1. PASSWORD
Security rules require that access to most settings should be protected with a 2-level
password.
CAUTION:
The password assigned by the manufacturer involves pressing
◄
8 times
(consecutively). The same password is used for access to level I and level II.
The password is required for:

redefinition of functors settings 69→ ident 0 Main settings ;

redefinition of auxiliary settings 69→ ident 1 Auxiliary settings.
A new password should be assigned by using
Monitor3
.
Please refer to
Monitor3
to restore your forgotten password.
The following examples present changes in settings secured by a password. The example shows
how to navigate through menu to change the setting of rated primary voltage UN from 15 kV to
20 kV. Starting point → group
0 Main settings .
0 Main
settings

8
1 A
s

9
2 Settings
memory
  
1 7 10
00 External
parameters
20 Restore
settings

11
21 Password I
main settings

15
22 Password 2
main settings

19
23 Fix main
settings
       
2 6 !
*
12 14 16 18 20
0
Un [kV]
210 Password I
******** 220 Password II
******** 230 Fix main
settings
 
  
3 5 13 17 21
0000 Un [kV]
15.00 kV

4
0000 Un [kV]
20.00 kV
Press 8 x
button
◄
Press 8 x
button
◄
Press
button
▼

!!
*
*
! *! – Wait until ”! Settings restored” appears. This option means cancellation of new settings. The display will
show values restored from the device memory. It is recommended to restore settings routinely when settings are
read out on the display to eliminate effectively accidental changes in settings (not confirmed by the password),
which provides a true picture of the information saved in the settings memory.
This operation is equivalent to a repeated readout using
Monitor3
.
*
!! *! – Wait until ”! Settings fixed” or “! Fixed setting discarded” appears (if the password is incorrect).