Regulus uREG, User Manual

Page: 63 / 107

uREG User Manual
63
10.
u REG
START-UP
In order to start the device, apply auxiliary voltage as specified to the terminals [ + ] and [ - ]
and install an earthing conductor at the terminal [ ]:
auxiliary voltage sources:

88 to 350 V DC / 230 V AC for the PS-0 module, or

21 to 38 V DC for the PS-1 module
(in slot #3 and/or #6 or on both slots). Then
uREG
will start up. For color graphic display panels
( GH , GV ), the following test image (example) will be displayed for a while:
Fig. 10.1. Test pattern on the display
The panel equipped with a NV alphanumeric display will show:
* uREG panel *
REGULUS – Poznań
10.1. BOOT mode
Depending on other programmed software layers for the main computer, the LCD screen
will show one of the following texts:
BOOT modes
* uREG Boot
(C) REGULUS
or
* uREG Boot XXX
REGULUS [ info ]

where the optional field
XXX
can assume the following values:
POR, 4BT, RET
which should be understood as follows: