Regulus uREG, User Manual

Page: 52 / 107

uREG User Manual
52
8.5. RS-232 COMMUNICATION LINK
The DB9M (male) insulated connector provides communication using serial information
interchange with an external PC via EIA RS-232C interface. Transmission can be executed during
normal functioning of the unit and is asynchronous at a programmable speed (300 Bd – 115 200
Bd) via
uCZIPstd
or
uCZIPnet
protocols.
Factory settings* of the RS-232 connector →
19 200 Bd, parity, full duplex , uCZIPstd protocol .
* – Conformity with default settings of CZIP and CZIP-1,2,3,4 units.
8.6. USB COMMUNICATION LINK (B-TYPE)
The Universal Serial Bus (USB) provides communication with an external PC (e.g.
laptop/notebook) using a standard cable with A-type pins (from the PC side) and B-type pins
(from the
u REG
side).
Transmission can be executed during normal functioning of the unit.
u REG
is recognized by MS Windows (XP, Vista, 7, 8.1, 10 or higher) as HID ( Human Interface
Device ) and requires no installation of any additional drivers on the system! The USB connector
is also not associated with any setting in the
u REG
unit.
USB communication involves the
uCZIPstd
protocol.
Monitor3
is supplied together with the device. This program is used for quick, transparent and
direct access to information in the
u
REG unit via RS-232 and/or USB. The program offers simple
use of its functions (in particular, as regards setting programming), preview of events (reports),
indications, measurements, counters, logger, etc.
The program maintains full and continuous communication with the protective device without
any need for the user to perform manual adjustments.