Regulus uREG, User Manual

Page: 66 / 107

uREG User Manual
66
For applications supplied by
REGULUS
, in case inconsistent digital logic states on one of
the switches or the circuit-breaker are identified, a relevant text will be displayed on the LCD
screen. This may be a piece of information as follows:
! Sprzeczne syg-
nały stanu z: WL

Inconsistent state signals from breaker
If the described condition occurs, the device will also give an intermittent audible alarm on
faulty external circuits. The alarmed state is cancelled by pressing
Kas . Acknowledgment of all
improper states turns off audible alarms, and the display shows the last message generated by
the device.
By pressing
◄
(left) or
►
(right) , the following screen will be displayed:
0 Nastawy
główne

Main settings
This screen is the level to start navigation through → menu of
u REG
.
For
GH and GV panels, press
▲
(up) to go to the so-called Mini-Monitor and display its first
screen, i.e. bay fault indication.
Press
▼
(down) to go to the measurement screen (increased font size).
Pressing
Kas will always resume presentation of the synoptic mimic diagram (main screen).