Regulus uREG, User Manual

Page: 29 / 107

uREG User Manual
29
7.1. IF-0 / IF-4 MODULE (SLOT 0)
I nter f aces module of ARM CPU, operating memory, settings memory, event reports and
data recorder.
The IF-0 module is equipped with the following connectors:

ETH – magnetic insulation 8P8C port (i.e. RJ-45) of Ethernet 10/100BASE-T interface
(TCP/UDP/ICMP protocols);

RS-485 – galvanic separation DB9F (female) port of RS-485 main interface w/ dedicated
LED indicating interface activity; speed range: 300 to 512 000 Bd; full duplex (2 twisted
pairs), distance up to 1000 m, up to 256 bus nodes;

AUX-485 – galvanic separation DB9F port of AUX-485 auxiliary interface w/ dedicated
LED indicating interface activity; speed range: 300 to 512 000 Bd; full duplex (2 twisted
pairs), distance up to 1000 m, up to 256 bus nodes;

PANEL – 3 insulated DB9F ports of PN-485 interface to connect the operator panel;
ports located at the top, side and bottom of the module; full duplex, distance 0 to 15 m;
Fig. 7.1. Connectors of the IF-0 module.
Provided communication protocols:

uCZIPstd (slave and master),

uCZIPnet,

DNP3.0,

IEC 60870-5-103,

IEC 60870-5-101/-104,

IEEE-1588 (PTP time synchronization: precision = 1 µs),

CZIPstd (slave and master, backward compatibility),

CAN-PPM2 (for IF-3),

Modbus ASCII,

Modbus RTU (master and slave),

Modbus TCP,

Compatible with IEC-61850.
The
IF-x module is required to start up
u REG
.
The IF-4 module is a functional equivalent of IF-0, equipped with 2 x CAN-BUS interfaces.
The IF-3 module – functional equivalent of IF-4, out of production.