Raymarine e7 User Reference Download Page 115

Page: 115 / 320

Menu item

Description

Options

Chart Boundaries

Determines whether a line indicating the chart boundary is displayed.

•

Off

— chart boundary is NOT displayed.

•

— chart boundary is displayed.

• Off

• On (default)

Spot Soundings

Determines whether a number indicating depth is displayed.

•

Off

— depth is NOT displayed.

•

— depth is displayed.

• Off

• On (default)

Safety Contour

The chart will use this depth as the deep water boundary. Water
areas of depth greater than this will be colored using the appropriate

Deep Water Color

• Off

• 7 ft

• 10 ft

• 16 ft

• 20 ft

• 33 ft

• 66 ft (default)

Depth Contour

The depth contour is shown on the chart display as a line indicating
the depth at a particular position.

• Off

• 16 ft

• 20 ft

• 33 ft

• 66 ft

• All (default)

Deep Water Color

Determines the color used to shade areas of deep water. (The depth
used to determine areas of deep water is specified by the

Safety

Contour

setting)

• White (default)

• Blue

Using the chart

115

Summary of Contents for e7

































































































































































































































































































































Search results

Summary of Contents for e7

Reviews:

Related manuals for e7

Brands by name

Popular brands

Raymarine e7, User Reference

Search results

Summary of Contents for e7

Reviews:

Related manuals for e7

Brands by name

Popular brands