Raymarine e7 User Reference Download Page 51

Page: 51 / 320

3. Gently press the card all the way in to the card slot, as shown in

the diagram below. The card is secure when an audible click is
heard.

12292-1

4. To prevent the ingress of water and consequent damage, close

the chart card door.

4.3 Removing a memory card or chart
card

From the homescreen:

1. Select

My Data

2. Select

Eject Card

A message is displayed prompting you to select the memory
device you want to eject.

3. Select

SD1

for a memory card in the top card slot, or

SD2

for a

memory card in the bottom card slot.

4. Open the chart card door, located on the front right of the display.

5. Push the edge of the card towards the unit, until an audible

click is heard.

The card is released from the card slot mechanism, as shown in
the following diagram:

Managing display data

Summary of Contents for e7

































































































































































































































































































































Search results

Summary of Contents for e7

Reviews:

Related manuals for e7

Brands by name

Popular brands

Raymarine e7, User Reference

Search results

Summary of Contents for e7

Reviews:

Related manuals for e7

Brands by name

Popular brands