Raymarine e7 User Reference Download Page 178

Page: 178 / 320

10.3 AIS context menu

The AIS function includes a context menu which provides AIS target
information and menu items.

The AIS context menu can be accessed by:

• Highlighting an AIS target using the

Joystick

and pressing the

button, or

• Selecting and holding on an AIS target on screen — Hybridtouch

multifunction displays only.

The context menu provides the following AIS target data:

• MMSI

• CPA

• TCPA

• COG

• SOG

The context menu also provide the following menu items:

•

AIS Vector

— Switch target vectors On and Off.

•

AIS Data

— Switch on screen target data On and Off.

•

View Full AIS Target Information

•

Add Buddy

— Add target to the buddy directory.

The menu items can be accessed:

• using the

Rotary Control

and

button, or

• selecting the menu item on screen — Hybridtouch multifunction

displays only.

178

e7 / e7D — User reference

Summary of Contents for e7

































































































































































































































































































































Search results

Summary of Contents for e7

Reviews:

Related manuals for e7

Brands by name

Popular brands

Raymarine e7, User Reference

Search results

Summary of Contents for e7

Reviews:

Related manuals for e7

Brands by name

Popular brands