Raymarine e7, User Reference

Page: 162 / 320

Creating a VRM/EBL on the radar display
From the radar application:
1. Select a target on screen.
2. Press the
Ok button.
The radar context menu is displayed.
3. Select Place VRM/EBL .
4. Using the joystick adjust the VRM/EBL to the required bearing
and range.
5. Press the Ok button to save the settings.
Note: The first VRM/EBL will be placed at a location of 1/3 of
the current range and 030° relative to your vessel’s head. If this
setting is adjusted, the display will retain the adjustments and use
them when the VRM/EBL is next enabled.
Creating a VRM/EBL on the radar display using
touch
From the radar application:
1. Select and hold on the required target.
The radar context menu is displayed.
2. Select Place VRM/EBL .
3. Select the required bearing and range.
4. Press the
Ok button to save the settings.
Note: The first VRM/EBL will be placed at a location of 1/3 of
the current range and 030° relative to your vessel’s head. If this
setting is adjusted, the display will retain the adjustments and use
them when the VRM/EBL is next enabled.
Creating a floating VRM/EBL on the radar
display
From the radar application with a VRM/EBL already created:
1. Position the cursor over the VRM/EBL.
2. Press the
Ok button.
The radar context menu is displayed.
3. Use the Rotary Control to select Float Centre .
4. Press the Ok button.
5. Using the joystick, move the center position of the circle to the
desired position.
6. Press the Ok button to confirm the new position.
Note: When creating the first VRM/EBL, it will be placed at a
location of 1/3 of the current range and 030° relative to your
vessel’s head. If this setting is adjusted, the display will retain the
adjustments and use them when the VRM/EBL is next enabled.
Creating a floating VRM/EBL on the radar
display using touch
From the radar application with a VRM/EBL already created:
1. Press and hold on the VRM/EBL.
The radar context menu is displayed.
2. Select Float Centre .
3. Press the Ok button.
4. Select the desired location for the center position.
5. Press the
Ok button to confirm the new position.
Note: When creating the first VRM/EBL, it will be placed at a
location of 1/3 of the current range and 030° relative to your
vessel’s head. If this setting is adjusted, the display will retain the
adjustments and use them when the VRM/EBL is next enabled.
Unfloating a VRM/EBL on the radar display
From the radar application:
1. Position the cursor over the VRM/EBL.
162 e7 / e7D — User reference