Raymarine e7, User Reference

Page: 121 / 320

Note:
When arriving at a waypoint, the dialog title bar turns red to
indicate waypoint arrival.
Enabling the autopilot control function
From the homescreen:
1. Select
Set-up .
2. Select System Settings .
3. Select Autopilot Control so that On is highlighted.
Selecting Autopilot Control will switch the control between On
and Off.
Disengaging the autopilot in an emergency
With the autopilot engaged:
1. Press and release the
POWER button.
2. Select PILOT STANDBY .
The autopilot is disengaged, and put into standby mode.
Disengaging the autopilot
In the chart application with the autopilot engaged:
1. Select
Menu > Navigate > Stop Goto or Stop Follow .
The Pilot Control dialog is displayed.
2. Select STANDBY .
The autopilot is disengaged, and put in standby mode.
Engaging the autopilot
In the chart application:
1. Select
Menu > Navigate > Goto Cursor , Goto Waypoint , or
Follow Route as appropriate.
The Pilot Control dialog is displayed.
2. Select Engage Pilot — Track .
3. Select the appropriate option to engage the autopilot.
Engaging the autopilot using the context menu
In the chart application:
1. Position the cursor over a waypoint, or a waypoint in a route.
The chart object context menu is displayed.
2. Select Goto Waypoint .
3. Select Engage Pilot — Track .
Manually displaying the pilot control dialog box
You can also open the Pilot Control dialog at any time from the
homescreen or chart application.
1. From the homescreen:
i. Select Set-up .
ii. Select Pilot Controls .
2. From the chart application:
i. Select Menu .
ii. Select Navigate .
iii. Select Pilots Controls .
Using autopilot control
121