Raymarine e7 User Reference Download Page 45

Page: 45 / 320

GPS status symbols

The GPS receiver status is indicated in the databar.

Symbol

Description

A GPS receiver is connected and has
obtained a fix.

A GPS receiver is not connected, or
cannot obtain a fix.

Autopilot status symbols

The autopilot status is indicated in the databar.

Symbol

Description

Autopilot is in Standby mode.

Autopilot is in Track mode.

Autopilot is in Auto mode.

No autopilot detected.

Symbol

Description

Autopilot alarm active.

Dodge mode is active.

Fish mode is active.

Autopilot calibration.

Power steering active.

Wind Vane mode is active.

Getting started

Summary of Contents for e7

































































































































































































































































































































Search results

Summary of Contents for e7

Reviews:

Related manuals for e7

Brands by name

Popular brands

Raymarine e7, User Reference

Search results

Summary of Contents for e7

Reviews:

Related manuals for e7

Brands by name

Popular brands